News

  • Use skills of CNC plasma cutting machine

    Use skills of CNC plasma cutting machine

    1. Cutting should start from the edge Try to cut from the edge as much as possible, instead of perforating and cutting. Using the edge as the starting point will extend the life of the consumable parts. The correct method is to directly aim the nozzle at the edge of the workpiece before starting ...
    Read more
  • How to improve accuracy during laser cutting machine processing

    How to improve accuracy during laser cutting machine processing

    In addition to the quality of the laser beam spot, the accuracy of the laser cutting machine machine tool determines the processing accuracy of the equipment to a large extent. It can be said that the higher the accuracy of the equipment machine tool, the higher the cutting accuracy. The greater ...
    Read more
  • Protective measures for fiber laser cutting machine in winter

    Protective measures for fiber laser cutting machine in winter

    In November, China entered the winter, and the temperature gradually became lower. There was heavy snowfall in many parts of the north. How to operate the fiber laser cutting machine normally in low temperature? It is essential to take corresponding anti-freezing measures. 1. The temperature in ...
    Read more
  • How to choose fiber laser cutting machine?

    How to choose fiber laser cutting machine?

    The laser cutting machine is to focus the laser light emitted from the laser into a high-power density laser beam through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, and the high-pressure gas coaxi...
    Read more
  • What are the common faults in the use of plasma cutting machines?

    What are the common faults in the use of plasma cutting machines?

    Plasma cutting machine has high power and improper use will seriously affect the cutting effect of plasma cutting machine and shorten the life of wearing parts. Next, we will list some common usage failures: 1. There is a pilot arc on the cutting torch, but it cannot be transferred. Reason: (1) ...
    Read more
  • New machine CA-8000 Square pipe plasma cutting machine

    New machine CA-8000 Square pipe plasma cutting machine

    New completed CA-8000 metal square pipe round tube plasma cutting machine The maximum processing length of this machine is up to 8m, and the maximum diameter of round pipe cutting is 400mm. The whole machine uses a very heavy bed frame to ensure the stability of processing metal pipes, and use...
    Read more
  • Introduction of Wood Atc CNC Router

    Introduction of Wood Atc CNC Router

    1. The body of the ATC CNC Router adopts a steel frame structure to be tailor-welded, quenched and tempered, with strong rigidity and no deformation. 2. Parallel line square rail, single and double row six-row steel ball guide slider, large bearing force, stable operation, high precision, long li...
    Read more
  • Sea freight continues to skyrocket

    Sea freight continues to skyrocket

    The surge in global shipping prices that began in July last year has continued to this day and has not yet ended, and even continues to rise. The Baltic Dry Index (BDI) has risen from 1374 at the beginning of the year to the latest 4163, which has more than doubled. In the past year, global ship...
    Read more
  • Common faults and solutions of CNC Router

    Common faults and solutions of CNC Router

    Question 1: When opening the software, the computer prompts “Failed to open the card, please check the card” prompt. Solution: 1. Generally speaking, when encountering this situation, check the driver of the board as soon as possible, because it may be that the driver of Weihong card ...
    Read more
  • What is the reason why the spindle bearing of CNC Router is easy to break?

    What is the reason why the spindle bearing of CNC Router is easy to break?

    The spindle is an important part of the cnc router, and it is also a main part that the cnc router must run. The main problem of the cnc router spindle is that the bearing is easy to break. There are many reasons for this problem, which depends on the spindle itself and the conditions of use. In ...
    Read more
  • Common problems of fiber laser cutting machine

    Common problems of fiber laser cutting machine

    1. Floating head alarm 1) Alarm name: body capacitance becomes smaller Alarm reason and inspection method: a. The nozzle is not installed b. The ceramic ring is loose。c. There is a problem with the wiring. 2) Alarm name: Abnormal increase in capacitance Alarm reason and inspection method: calibr...
    Read more
  • Influencing factors of CNC Router speed

    Influencing factors of CNC Router speed

    1. The speed problem of cnc router is firstly determined by the configuration of the machine itself.Such as the power of motor is small also will impact the speed.The standard configuration of CAMEL CNC cnc router is big power 450B stpper motor to ensure the working speed while machine working,it...
    Read more
123456 Next > >> Page 1 / 9