Camel CNC News

  • Fiber laser cutting machine maintenance process

    Fiber laser cutting machine maintenance process

    1. Cleaning of the dust removal device When the dust removal device of the laser cutting machine is used for a long time, a lot of solid dust will accumulate in the fan, resulting in loud noise, peculiar smell and unsmooth exhaust. Treatment method: turn off the power supply, remove the air inle...
    Read more
  • How to avoid the overburning of fiber laser cutting machine?

    How to avoid the overburning of fiber laser cutting machine?

    1. Add cooling point at the corner When cutting sharp-corner metal sheets, the location where overburning is more likely to occur is often at the sharp corners. Overburning will cut the sharp corners into rounds. At this time, add a cooling point at the sharp corners and stop at the sharp corner...
    Read more
  • Merry Christmas!

    Merry Christmas!

    Merry Christmas and Happy New Year to all.
    Read more
  • Analysis of the concept and advantages of laser cutting machine and plasma cutting machine

    Analysis of the concept and advantages of laser cutting machine and plasma cutting machine

    1. The concept of laser cutting machine and plasma cutting machine Laser cutting originated in the mid-1960s and is characterized by the use of magnified lasers as “tools” and the use of computer numerical control programs to perform cutting operations. The laser cutting machine focus...
    Read more
  • What is the reasonable speed of the spindle of the CNC Router?

    What is the reasonable speed of the spindle of the CNC Router?

    At present, most of the spindle motor speed of woodworking cnc router is 24,000 revolutions per minute, and some high-speed spindles can reach 60000 revolutions. Most customers think that the higher the speed of spindle, the better, and the quality of the engraving will be better. It increases wi...
    Read more
  • How to choose fiber laser cutting machine?

    How to choose fiber laser cutting machine?

    Nowadays, the fiber laser  cutting machine manufacturing industry in the market is developing faster and faster, and there are more and more fiber laser cutting machines on the market. It can be said that there is no best, only better. When choosing a fiber cutting machine, we still recommend The...
    Read more
  • Use skills of CNC plasma cutting machine

    Use skills of CNC plasma cutting machine

    1. Cutting should start from the edge Try to cut from the edge as much as possible, instead of perforating and cutting. Using the edge as the starting point will extend the life of the consumable parts. The correct method is to directly aim the nozzle at the edge of the workpiece before starting ...
    Read more
  • How to choose fiber laser cutting machine?

    How to choose fiber laser cutting machine?

    The laser cutting machine is to focus the laser light emitted from the laser into a high-power density laser beam through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, and the high-pressure gas coaxi...
    Read more
  • What are the common faults in the use of plasma cutting machines?

    What are the common faults in the use of plasma cutting machines?

    Plasma cutting machine has high power and improper use will seriously affect the cutting effect of plasma cutting machine and shorten the life of wearing parts. Next, we will list some common usage failures: 1. There is a pilot arc on the cutting torch, but it cannot be transferred. Reason: (1) ...
    Read more
  • New machine CA-8000 Square pipe plasma cutting machine

    New machine CA-8000 Square pipe plasma cutting machine

    New completed CA-8000 metal square pipe round tube plasma cutting machine The maximum processing length of this machine is up to 8m, and the maximum diameter of round pipe cutting is 400mm. The whole machine uses a very heavy bed frame to ensure the stability of processing metal pipes, and use...
    Read more
  • Introduction of Wood Atc CNC Router

    Introduction of Wood Atc CNC Router

    1. The body of the ATC CNC Router adopts a steel frame structure to be tailor-welded, quenched and tempered, with strong rigidity and no deformation. 2. Parallel line square rail, single and double row six-row steel ball guide slider, large bearing force, stable operation, high precision, long li...
    Read more
  • Common faults and solutions of CNC Router

    Common faults and solutions of CNC Router

    Question 1: When opening the software, the computer prompts “Failed to open the card, please check the card” prompt. Solution: 1. Generally speaking, when encountering this situation, check the driver of the board as soon as possible, because it may be that the driver of Weihong card ...
    Read more
123456 Next > >> Page 1 / 6